steel member
英 [stiːl ˈmembə(r)]
美 [stiːl ˈmembər]
网络 钢构件
双语例句
- Steel member measuring techniques of three-point localization method and vertical plane compensation method
钢构件的三点定位法、垂直面补偿法测量技术 - It was examined that the dynamic peculiarity, the welding line flaw, the size of steel member section and the rusty phenomenon of a steel pedestrian overcrossing.
对某钢结构人行天桥的动力特性、焊缝缺陷、应力和变形、钢构件截面尺寸和锈蚀情况进行了检测，按规范要求验算了结构的整体稳定和局部稳定。 - Steel member shall be stored safely and orderly to prevent the transformation and damages to compressive member.
钢构件堆放应安全、整齐并防止构件受压变形损坏。 - Studies on Damage Identification of Steel Member Structures Based on Vibration Test
基于振动测试的杆系钢结构损伤识别研究 - Axial Force Calculation Model of Circular Hollow Steel Member in Truss with Overlapped Unstiffened Joints
搭接节点圆钢管桁架结构轴力计算模型 - And steel member placement, steel bar tying, concrete casting is critical to the quality of steel skeleton concrete structure.
钢构件安装精度控制、筋绑扎及混凝土浇筑是钢骨混凝土结构质量保证的关键。 - The steel member is chromium plated on those surfaces with which the seal interacts.
钢质零件上与密封唇接触的表面以镀铬。 - Dynamical stability analysis of steel member strengthened with carbon fiber
碳纤维增强钢构件的动力稳定性分析 - Strengthening parapet wall and canopy, embedding steel member, welding steel structure frame and dry combining granite blocks and in this way to be satisfied with the result of finishing surface.
加固女儿墙和雨蓬反口板，在填充墙上凿洞埋设铁件，焊接钢结构框架干挂花岗石，取得令人满意的饰面效果。 - Project Computation for Consolidating Reinforced Concrete Structure with Bond Steel Member
用粘钢加固钢筋混凝土结构的设计计算方法 - The Basic Theoretical Study of H-section Axial Compressed Steel Member in Confined Buckling
H型截面轴心受压钢构件限制失稳的基本理论研究 - The temperature stress of variable section steel member subjected to fire
火灾下变截面钢构件的温度内力研究 - The important performance index of steel member is strength and toughness. Its safety design contains not only strength design but also resistance to brittle failure design. Fracture toughness is often important basis of structural design of materials.
钢构件的重要性能指标是强度和韧度，其安全设计不但包括强度设计，而且包括抗脆断设计，材料的断裂韧度一直是结构设计的重要依据。 - Defective in large steel member welding and prevention thereof
大型钢结构构件焊接中质量问题及预防措施 - This paper briefly introduces the application and development of cold-formed steel in building constructions both in China and abroad, the usual shapes of cold-formed steel member in buildings, the requirements of material properties and steel forming etc.
本文主要介绍冷弯型钢在国内外房屋建筑中应用与发展现状，冷弯型钢建筑构件常用截面形式、材质及制造要求等。 - This paper researches the structural system and its member performance of multi-storey residential structure system based on cold-formed steel. And this system is proposed based on the area of Wuhan with low earthquake fortification intensity and its great advantage of steel production and steel member manufacture.
本文研究了冷弯型多层钢结构住宅的构件性能与结构体系，该体系是针对武汉市属于地震低烈度区，及其在钢材生产和钢结构构件加工上具有的强大优势的基础上提出来的。 - In order to utilize the capability of steel sufficiently, the steel member in SRC beams usually is not symmetry geometrically about its strong axis, and the shape of its cross section is anomalous for rolling steel.
为了充分利用钢材的抗拉性能好的优点，劲性混凝土梁中配置的钢梁往往截面绕强轴非几何对称，并且对于轧制工字钢，其截面形状不规则。 - Practical method for analysis of elasto-plastic deformation of steel member structures
杆系钢结构弹塑性变形实用分析法 - Analysis about measurement of welding line of some workshop's steel member
某厂房钢构件焊缝测试分析 - The position of damage section of fillet weld under torsion closing with the connection side between fillet weld and steel member differs from that obtained by traditional method.
与传统理论所提到的破坏截面（焊喉）位置不同，角焊缝在扭矩作用下破坏截面的位置靠近钢构件连接边。 - Authors introduce the lifting construction technique of steel member of one-way steel reinforced concrete structure, and present some problems needed attention during the construction of steel structure.
介绍多层单向型钢混凝土框架结构体系中钢构件的吊装施工工艺，阐述钢结构施工时应注意的问题。 - In this paper the author introduces the project computation for consolidating reinforced concrete structure girder with bond steel member by laying emphasis on accident analysis with actual examples in project and has got success.
本文通过用粘钢方法加固钢筋混凝土框架大梁取得成功的工程实例，重点分析了事故原因并提出了粘钢加固钢筋混凝土结构的设计计算方法。 - Furthermore, connection design of steel member splice in SRC structure were also discussed.
此外，还对钢骨的拼接设计作了简要介绍。 - This method does not need to judge the position of the neutral axis of the composite cross-section. This method will avoid the problem that the result is too conservative when the neutral axis lies in the top flange of the steel member as the traditional method dose.
该方法无需判断组合截面中性轴的位置，并且避免了按照传统方法计算当中性轴位于钢梁上翼缘时计算结果过于保守的问题； - This lighting structure consists of the part single-layer ellipsoid shell and the vertical glass curtain wall. With dot point supporting glaze and concise steel member, the structure has a good version.
由部分单层椭球体壳和其后的竖直玻璃幕墙组成的采光顶结构，采用点支式玻璃幕墙，结构通透、美观，视觉效果好。 - Temperature numerical calculation of protected steel member in fire
火灾中受保护钢构件的温度数值计算 - Direct calculation method for axially compressed steel member
钢轴心受压构件截面的直接计算法 - A single shear test about CFRP-steel member was performed to investigate the shearing bond performance between CFRP sheet and steel member.
采用碳纤维布-钢构件搭接接头的单剪试验方法，深入研究了碳纤维布-钢构件的抗剪粘接性能。 - Element stiffness equation of steel-structure material mode and steel member in the condition of high temperature and fire
高温（火灾）条件下钢结构材料模型及钢构件的单元刚度方程 - The pseudo-dynamic testing system based on calculation command control is set up. The pseudo-dynamic testing about steel member is carried out to validate the feasibility of the testing system.
建立了基于计算命令控制的拟动力试验系统，通过钢构件的拟动力试验来验证了试验系统的可行性。